Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-358.23.2.el6.x86_64 (jxiong@titan) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Sat Nov 16 22:48:17 PST 2013
Command line: root=nfs:192.168.1.78:/home/exports/nfsroot,nfsvers=3 ip=dhcp ro console=ttyS0,115200 console=tty0 ramdisk_size=1048576
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000dfffd000 (usable)
BIOS-e820: 00000000dfffd000 - 00000000e0000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI 2.4 present.
SMBIOS version 2.4 @ 0xFDA90
DMI: Bochs Bochs, BIOS Bochs 01/01/2007
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x120000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 00E0000000 mask FFE0000000 uncachable
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
last_pfn = 0xdfffd max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-00000000dfffd000
0000000000 - 00dfe00000 page 2M
00dfe00000 - 00dfffd000 page 4k
kernel direct mapping tables up to dfffd000 @ 8000-e000
init_memory_mapping: 0000000100000000-0000000120000000
0100000000 - 0120000000 page 2M
kernel direct mapping tables up to 120000000 @ c000-12000
RAMDISK: 7e8b4000 - 7ffff06c
ACPI: RSDP 00000000000fd8a0 00014 (v00 BOCHS )
ACPI: RSDT 00000000dfffd660 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000dfffff80 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000dfffd9b0 02589 (v01 BXPC BXDSDT 00000001 INTL 20100528)
ACPI: FACS 00000000dfffff40 00040
ACPI: SSDT 00000000dfffd7e0 001C1 (v01 BOCHS BXPCSSDT 00000001 BXPC 00000001)
ACPI: APIC 00000000dfffd6e0 0008A (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: HPET 00000000dfffd6a0 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Bootmem setup node 0 0000000000000000-0000000120000000
NODE_DATA [000000000000d000 - 0000000000040fff]
bootmap [0000000000041000 - 0000000000064fff] pages 24
(8 early reservations) ==> bootmem [0000000000 - 0120000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 000201b0e4] TEXT DATA BSS ==> [0001000000 - 000201b0e4]
#3 [007e8b4000 - 007ffff06c] RAMDISK ==> [007e8b4000 - 007ffff06c]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [000201c000 - 000201c079] BRK ==> [000201c000 - 000201c079]
#6 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#7 [000000c000 - 000000d000] PGTABLE ==> [000000c000 - 000000d000]
found SMP MP-table at [ffff8800000fdab0] fdab0
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1c256c1, boot clock
[ffffea0000000000-ffffea0003ffffff] PMD -> [ffff880028600000-ffff88002bffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00120000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000dfffd
0: 0x00100000 -> 0x00120000
On node 0 totalpages: 1048475
DMA zone: 56 pages used for memmap
DMA zone: 104 pages reserved
DMA zone: 3838 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 899125 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xb008
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000dfffd000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000feffc000
PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: e0000000:1effc000)
Booting paravirtualized kernel on KVM
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s94616 r8192 d24168 u524288
pcpu-alloc: s94616 r8192 d24168 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
kvm-clock: cpu 0, msr 0:282166c1, primary cpu clock
kvm-stealtime: cpu 0, msr 2820e840
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1032243
Policy zone: Normal
Kernel command line: root=nfs:192.168.1.78:/home/exports/nfsroot,nfsvers=3 ip=dhcp ro console=ttyS0,115200 console=tty0 ramdisk_size=1048576
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Memory: 4027092k/4718592k available (5224k kernel code, 524692k absent, 166808k reserved, 7118k data, 1264k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:440
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Detected 3400.022 MHz processor.
Calibrating delay loop (skipped) preset value.. 6800.04 BogoMIPS (lpj=3400022)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
mce: CPU supports 10 MCE banks
alternatives: switching to unfair spinlock
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21445 entries in 85 pages
APIC routing finalized to flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel QEMU Virtual CPU version 1.0 stepping 03
Performance Events: unsupported p6 CPU model 2 no PMU driver, software events only.
NMI watchdog disabled (cpu0): hardware events not enabled
Booting Node 0, Processors #1
kvm-clock: cpu 1, msr 0:282966c1, secondary cpu clock
kvm-stealtime: cpu 1, msr 2828e840
#2
kvm-clock: cpu 2, msr 0:283166c1, secondary cpu clock
kvm-stealtime: cpu 2, msr 2830e840
#3 Ok.
kvm-clock: cpu 3, msr 0:283966c1, secondary cpu clock
kvm-stealtime: cpu 3, msr 2838e840
Brought up 4 CPUs
Total of 4 processors activated (27200.17 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Table not found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xfebfffff] (ignored)
pci 0000:00:01.1: reg 20: [io 0xc060-0xc06f]
pci 0000:00:01.2: reg 20: [io 0xc000-0xc01f]
pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0xb100-0xb10f] claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xfebf4000-0xfebf4fff]
pci 0000:00:02.0: reg 30: [mem 0xfebd0000-0xfebdffff pref]
pci 0000:00:03.0: reg 10: [io 0xc020-0xc03f]
pci 0000:00:03.0: reg 14: [mem 0xfebf5000-0xfebf5fff]
pci 0000:00:03.0: reg 30: [mem 0xfebe0000-0xfebeffff pref]
pci 0000:00:04.0: reg 10: [mem 0xfebf0000-0xfebf3fff]
pci 0000:00:06.0: reg 10: [io 0xc040-0xc05f]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs 9) *0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io 0x0060]
pnp 00:02: [io 0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io 0x03f2-0x03f5]
pnp 00:04: [io 0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [mem 0xfed00000-0xfed003ff]
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp: PnP ACPI: found 7 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 0 pci_try_num: 1
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 23852k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1399922626.646:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7912
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key 88B6ABBCC307AF4B
- User ID: Red Hat, Inc. (Kernel Module GPG key)
- Added public key D4A26C9CCD09BEDA
- User ID: Red Hat Enterprise Linux Driver Update Program <secalert@redhat.com>
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [1] registered
acpiphp: Slot [2] registered
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Interface detection failed
ipmi_si: Unable to find any System Interface(s)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-358.23.2.el6.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2014-05-12 19:23:46 UTC (1399922626)
Initalizing network drop monitor service
Freeing unused kernel memory: 1264k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 900k freed
Freeing unused kernel memory: 1672k freed
dracut: dracut-004-303.el6
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.13 (Sep 07, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 26, 2012)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
In beiscsi_module_init, tt=ffffffffa01a3780
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
usb 1-1: new full speed USB device number 2 using uhci_hcd
Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.6-ioctl (2012-07-25) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3
Refined TSC clocksource calibration: 3400.030 MHz.
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc060 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc068 irq 15
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU 1.0
usb 1-1: SerialNumber: 42
usb 1-1: configuration #1 chosen from 1 choice
input: QEMU 1.0 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input4
generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 1.0 QEMU USB Tablet] on usb-0000:00:01.2-1/input0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
virtio-pci 0000:00:06.0: PCI INT A -> Link[LNKB] -> GSI 10 (level, high) -> IRQ 10
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 24 for MSI/MSI-X
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 25 for MSI/MSI-X
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
dracut: Mounted root filesystem 192.168.1.78:/home/exports/nfsroot
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1399922630.265:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
snd_hda_intel 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
snd_hda_intel 0000:00:04.0: irq 27 for MSI/MSI-X
snd_hda_intel 0000:00:04.0: setting latency timer to 64
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0
microcode: CPU0 sig=0x623, pf=0x0, revision=0x1
platform microcode: firmware: requesting intel-ucode/06-02-03
microcode: CPU1 sig=0x623, pf=0x0, revision=0x1
platform microcode: firmware: requesting intel-ucode/06-02-03
microcode: CPU2 sig=0x623, pf=0x0, revision=0x1
platform microcode: firmware: requesting intel-ucode/06-02-03
microcode: CPU3 sig=0x623, pf=0x0, revision=0x1
platform microcode: firmware: requesting intel-ucode/06-02-03
Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
eth0: no IPv6 routers present
LNet: HW CPU cores: 4, npartitions: 2
alg: No test for crc32 (crc32-table)
alg: No test for adler32 (adler32-zlib)
padlock: VIA PadLock Hash Engine not detected.
Lustre: Lustre: Build Version: 2.5.14-g6dbef86-CHANGED-2.6.32-358.23.2.el6.x86_64
LNet: Added LNI 192.168.1.70@tcp [8/256/0/180]
LNet: Accept all, port 988
Lustre: Echo OBD driver; http://www.lustre.org/
LDISKFS-fs (loop0): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop0): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop0): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop0): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop0): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop0): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop0): mounted filesystem with ordered data mode. quota=on. Opts:
Lustre: Setting parameter lustre-MDT0000-mdtlov.lov.stripesize in log lustre-MDT0000
Lustre: Setting parameter lustre-MDT0000.mdt.identity_upcall in log lustre-MDT0000
Lustre: Skipped 3 previous similar messages
Lustre: ctl-lustre-MDT0000: No data found on store. Initialize space
Lustre: lustre-MDT0000: new disk, initializing
LustreError: 11-0: lustre-MDT0000-lwp-MDT0000: Communicating with 0@lo, operation mds_connect failed with -11.
LDISKFS-fs (loop1): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop1): mounted filesystem with ordered data mode. quota=on. Opts:
Lustre: lustre-OST0000: new disk, initializing
Lustre: srv-lustre-OST0000: No data found on store. Initialize space
Lustre: Skipped 1 previous similar message
LustreError: 13a-8: Failed to get MGS log params and no local copy.
LustreError: 13a-8: Failed to get MGS log params and no local copy.
LDISKFS-fs (loop2): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop2): mounted filesystem with ordered data mode. quota=on. Opts:
Lustre: lustre-OST0001: new disk, initializing
LDISKFS-fs (loop3): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop3): mounted filesystem with ordered data mode. quota=on. Opts:
Lustre: srv-lustre-OST0002: No data found on store. Initialize space
Lustre: Skipped 1 previous similar message
LustreError: 13a-8: Failed to get MGS log params and no local copy.
LustreError: Skipped 2 previous similar messages
LDISKFS-fs (loop4): mounted filesystem with ordered data mode. quota=on. Opts:
LDISKFS-fs (loop4): mounted filesystem with ordered data mode. quota=on. Opts:
Lustre: lustre-OST0003: new disk, initializing
Lustre: Skipped 1 previous similar message
LustreError: 11-0: lustre-MDT0000-mdc-ffff880117be9000: Communicating with 0@lo, operation mds_connect failed with -11.
Lustre: Layout lock feature supported.
Lustre: Mounted lustre-client
Lustre: Layout lock feature supported.
Lustre: Mounted lustre-client
Lustre: DEBUG MARKER: Using TIMEOUT=20
Lustre: DEBUG MARKER: excepting tests:
Lustre: DEBUG MARKER: Using TIMEOUT=20
Lustre: DEBUG MARKER: == racer test 1: racer on clients: venus DURATION=1800 == 12:29:16 (1399922956)
Lustre: ctl-lustre-MDT0000: super-sequence allocation rc = 0 [0x0000000200000400-0x0000000240000400):0:mdt
LustreError: 5644:0:(ofd_grant.c:255:ofd_grant_space_left()) lustre-OST0003: cli 7a8ee953-e009-22ec-991e-09aacf9d0e8f/ffff8800d8943400 left 37056512 < tot_grant 37060608 unstable 0 pending 0
LustreError: 11406:0:(ofd_grant.c:255:ofd_grant_space_left()) lustre-OST0003: cli 3d9c775b-0522-256e-4f4e-cb541261acbf/ffff8800d8940c00 left 33943552 < tot_grant 33972224 unstable 0 pending 0
LustreError: 3335:0:(ofd_grant.c:255:ofd_grant_space_left()) lustre-OST0003: cli 3d9c775b-0522-256e-4f4e-cb541261acbf/ffff8800d8940c00 left 33943552 < tot_grant 33947648 unstable 0 pending 0
LustreError: 3335:0:(ofd_grant.c:255:ofd_grant_space_left()) lustre-OST0003: cli 3d9c775b-0522-256e-4f4e-cb541261acbf/ffff8800d8940c00 left 29761536 < tot_grant 29806592 unstable 0 pending 0
LustreError: 13129:0:(pack_generic.c:774:lustre_msg_string()) can't unpack short string in msg ffffc90007e59890 buffer[6] len 3: strlen 1
LustreError: 13129:0:(layout.c:2005:__req_capsule_get()) @@@ Wrong buffer for field `name' (6 of 8) in format `LDLM_INTENT_OPEN': 3 vs. 0 (client)
req@ffff8800b392c000 x1467925595447208/t0(0) o101->7a8ee953-e009-22ec-991e-09aacf9d0e8f@0@lo:0/0 lens 576/0 e 0 to 0 dl 1399923925 ref 1 fl Interpret:/0/ffffffff rc 0/-1
LustreError: 13129:0:(mdt_handler.c:1839:mdt_reint_internal()) Can't unpack reint, rc -14
LustreError: 11-0: lustre-MDT0000-mdc-ffff8800d8d4d400: Communicating with 0@lo, operation ldlm_enqueue failed with -14.
LustreError: 18628:0:(mdc_locks.c:916:mdc_enqueue()) ldlm_cli_enqueue: -14
LustreError: 16485:0:(mdc_locks.c:916:mdc_enqueue()) ldlm_cli_enqueue: -2
loop: Write error at byte offset 119980032, length 4096.
loop: Write error at byte offset 119984128, length 4096.
loop: Write error at byte offset 126869504, length 4096.
loop: Write error at byte offset 126996480, length 4096.
loop: Write error at byte offset 127123456, length 4096.
loop: Write error at byte offset 127250432, length 4096.
loop: Write error at byte offset 127377408, length 4096.
loop: Write error at byte offset 127504384, length 4096.
loop: Write error at byte offset 127631360, length 4096.
loop: Write error at byte offset 127758336, length 4096.
loop: Write error at byte offset 127885312, length 4096.
loop: Write error at byte offset 110383104, length 4096.
loop: Write error at byte offset 110505984, length 4096.
loop: Write error at byte offset 110632960, length 4096.
loop: Write error at byte offset 110759936, length 4096.
loop: Write error at byte offset 110886912, length 4096.
loop: Write error at byte offset 111013888, length 4096.
loop: Write error at byte offset 111140864, length 4096.
loop: Write error at byte offset 111267840, length 4096.
loop: Write error at byte offset 111394816, length 4096.
loop: Write error at byte offset 120012800, length 4096.
loop: Write error at byte offset 120139776, length 4096.
loop: Write error at byte offset 120266752, length 4096.
loop: Write error at byte offset 120393728, length 4096.
loop: Write error at byte offset 120520704, length 4096.
loop: Write error at byte offset 120647680, length 4096.
loop: Write error at byte offset 120774656, length 4096.
loop: Write error at byte offset 120901632, length 4096.
loop: Write error at byte offset 121028608, length 4096.
loop: Write error at byte offset 127918080, length 4096.
loop: Write error at byte offset 128045056, length 4096.
loop: Write error at byte offset 128172032, length 4096.
loop: Write error at byte offset 128299008, length 4096.
loop: Write error at byte offset 128425984, length 4096.
loop: Write error at byte offset 128552960, length 4096.
loop: Write error at byte offset 128679936, length 4096.
loop: Write error at byte offset 128806912, length 4096.
loop: Write error at byte offset 128933888, length 4096.
loop: Write error at byte offset 111427584, length 4096.
loop: Write error at byte offset 111554560, length 4096.
loop: Write error at byte offset 111681536, length 4096.
loop: Write error at byte offset 111808512, length 4096.
loop: Write error at byte offset 111935488, length 4096.
loop: Write error at byte offset 112062464, length 4096.
loop: Write error at byte offset 112189440, length 4096.
loop: Write error at byte offset 112316416, length 4096.
loop: Write error at byte offset 112443392, length 4096.
loop: Write error at byte offset 121057280, length 4096.
loop: Write error at byte offset 121184256, length 4096.
loop: Write error at byte offset 121311232, length 4096.
loop: Write error at byte offset 121438208, length 4096.
loop: Write error at byte offset 121565184, length 4096.
loop: Write error at byte offset 121692160, length 4096.
loop: Write error at byte offset 121819136, length 4096.
loop: Write error at byte offset 121946112, length 4096.
loop: Write error at byte offset 122073088, length 4096.
loop: Write error at byte offset 128966656, length 4096.
loop: Write error at byte offset 129093632, length 4096.
loop: Write error at byte offset 129220608, length 4096.
loop: Write error at byte offset 129347584, length 4096.
loop: Write error at byte offset 129474560, length 4096.
loop: Write error at byte offset 129601536, length 4096.
loop: Write error at byte offset 129728512, length 4096.
loop: Write error at byte offset 129855488, length 4096.
loop: Write error at byte offset 129982464, length 4096.
LustreError: 5653:0:(osd_io.c:71:__osd_init_iobuf()) ASSERTION( iobuf->dr_elapsed_valid == 0 ) failed: iobuf ffff8800cff42bf0, reqs 0, rw 1, line 748
LustreError: 5653:0:(osd_io.c:71:__osd_init_iobuf()) LBUG
Pid: 5653, comm: ll_ost_io00_003
Call Trace:
[<ffffffffa0397895>] libcfs_debug_dumpstack+0x55/0x80 [libcfs]
[<ffffffffa0397e97>] lbug_with_loc+0x47/0xb0 [libcfs]
[<ffffffffa0c1b138>] __osd_init_iobuf+0x338/0x350 [osd_ldiskfs]
[<ffffffffa0c1e304>] osd_write_commit+0x154/0x670 [osd_ldiskfs]
[<ffffffffa0e31f84>] ofd_commitrw_write+0x684/0x11b0 [ofd]
[<ffffffffa0e34ced>] ofd_commitrw+0x5cd/0xbb0 [ofd]
[<ffffffffa0229861>] ? lprocfs_counter_add+0x151/0x1d6 [lvfs]
[<ffffffffa0d6719d>] obd_commitrw+0x11d/0x390 [ost]
[<ffffffffa0d70f71>] ost_brw_write+0xea1/0x15d0 [ost]
[<ffffffffa06f5690>] ? target_bulk_timeout+0x0/0xc0 [ptlrpc]
[<ffffffffa0d775cc>] ost_handle+0x439c/0x44d0 [ost]
[<ffffffffa03a36a4>] ? libcfs_id2str+0x74/0xb0 [libcfs]
[<ffffffffa0745a85>] ptlrpc_server_handle_request+0x385/0xc00 [ptlrpc]
[<ffffffffa03a93df>] ? lc_watchdog_touch+0x6f/0x170 [libcfs]
[<ffffffffa073d129>] ? ptlrpc_wait_event+0xa9/0x2d0 [ptlrpc]
[<ffffffffa03a7911>] ? libcfs_debug_msg+0x41/0x50 [libcfs]
[<ffffffffa0746ded>] ptlrpc_main+0xaed/0x1740 [ptlrpc]
[<ffffffffa0746300>] ? ptlrpc_main+0x0/0x1740 [ptlrpc]
[<ffffffff81096a36>] kthread+0x96/0xa0
[<ffffffff8100c0ca>] child_rip+0xa/0x20
[<ffffffff810969a0>] ? kthread+0x0/0xa0
[<ffffffff8100c0c0>] ? child_rip+0x0/0x20
loop: Write error at byte offset 122101760, length 4096.
loop: Write error at byte offset 122228736, length 4096.
loop: Write error at byte offset 122355712, length 4096.
loop: Write error at byte offset 122482688, length 4096.
loop: Write error at byte offset 122609664, length 4096.
loop: Write error at byte offset 122736640, length 4096.
loop: Write error at byte offset 122863616, length 4096.
loop: Write error at byte offset 122990592, length 4096.
loop: Write error at byte offset 123117568, length 4096.
Kernel panic - not syncing: LBUG
Pid: 5653, comm: ll_ost_io00_003 Not tainted 2.6.32-358.23.2.el6.x86_64 #1
Call Trace:
[<ffffffff8150deec>] ? panic+0xa7/0x16f
[<ffffffffa0397eeb>] ? lbug_with_loc+0x9b/0xb0 [libcfs]
[<ffffffffa0c1b138>] ? __osd_init_iobuf+0x338/0x350 [osd_ldiskfs]
[<ffffffffa0c1e304>] ? osd_write_commit+0x154/0x670 [osd_ldiskfs]
[<ffffffffa0e31f84>] ? ofd_commitrw_write+0x684/0x11b0 [ofd]
[<ffffffffa0e34ced>] ? ofd_commitrw+0x5cd/0xbb0 [ofd]
[<ffffffffa0229861>] ? lprocfs_counter_add+0x151/0x1d6 [lvfs]
[<ffffffffa0d6719d>] ? obd_commitrw+0x11d/0x390 [ost]
[<ffffffffa0d70f71>] ? ost_brw_write+0xea1/0x15d0 [ost]
[<ffffffffa06f5690>] ? target_bulk_timeout+0x0/0xc0 [ptlrpc]
[<ffffffffa0d775cc>] ? ost_handle+0x439c/0x44d0 [ost]
[<ffffffffa03a36a4>] ? libcfs_id2str+0x74/0xb0 [libcfs]
[<ffffffffa0745a85>] ? ptlrpc_server_handle_request+0x385/0xc00 [ptlrpc]
[<ffffffffa03a93df>] ? lc_watchdog_touch+0x6f/0x170 [libcfs]
[<ffffffffa073d129>] ? ptlrpc_wait_event+0xa9/0x2d0 [ptlrpc]
[<ffffffffa03a7911>] ? libcfs_debug_msg+0x41/0x50 [libcfs]
[<ffffffffa0746ded>] ? ptlrpc_main+0xaed/0x1740 [ptlrpc]
[<ffffffffa0746300>] ? ptlrpc_main+0x0/0x1740 [ptlrpc]
[<ffffffff81096a36>] ? kthread+0x96/0xa0
[<ffffffff8100c0ca>] ? child_rip+0xa/0x20
[<ffffffff810969a0>] ? kthread+0x0/0xa0
[<ffffffff8100c0c0>] ? child_rip+0x0/0x20