[LU-8397] take comma as separator of mgsnode's list

• Status: Resolved
• Project: Lustre
• Fix Version/s: Lustre 2.10.0
• Type: Bug
• Priority: Minor
• Reporter: Vladimir Saveliev
• Assignee: Emoly Liu
• Resolution: Fixed
• Severity: 3

Description

mgsnode's list of nids is allowed to use comma as separator (see 36.15.3 of Lustre Operations Manual), however lustre_start_mgc() assumes that only colon can separate nids. Due to that nids after comma do not get into list of import's connections and those nids do not get involved.

Issue Links

• is related to: LU-3829 MDT mount fails if mkfs.lustre is run...
• is related to: LU-10162 mount command does not appear to be u...

Comments

[Gerrit Updater]

Vladimir Saveliev ([e-mail]) uploaded a new patch: http://review.whamcloud.com/21308
Subject: LU-8397 mgc: take comma as separator of mgsnode's list
Project: fs/lustre-release
Branch: master
Current Patch Set: 1
Commit: d967d2d09409aaaf036abe3001457260aff15292

[Peter Jones]

Emoly

Could you please take care of reviews etc for this patch?

Thanks

Peter

[Jian Yu]

Hi Bobi,

I found the following codes in lustre_start_mgc() introduced by patch https://review.whamcloud.com/7509 for LU-3829 might have some issue:

                        /*
                         * LU-3829.
                         * Here we only take the first mgsnid as its primary
                         * serving mgs node, the rest mgsnid will be taken as
                         * failover mgs node, otherwise they would be takens
                         * as multiple nids of a single mgs node.
                         */
                        while (class_parse_nid(ptr, &nid, &ptr) == 0) {
                                rc = do_lcfg(mgcname, nid, LCFG_ADD_UUID,
                                             niduuid, NULL, NULL, NULL);
                                if (rc == 0) {
                                        i = 1;
                                        break;
                                }
                        }

For multiple NIDs separated by commas on one MGS node, the above codes would only add the first NID and then break the while loop. After lustre_start_simple() is performed, the remaining comma-separated MGS NID(s) would not be added because the following condition doesn't work:

        /* Add any failover MGS nids */
        i = 1;
        while (ptr && ((*ptr == ':' ||
               class_find_param(ptr, PARAM_MGSNODE, &ptr) == 0))) {

ptr is previously assigned with ptr = lsi->lsi_lmd->lmd_mgs, and for comma-separated MGS NIDs, ptr now points to a ','. There is also no mgsnode= in the string, so the above condition does not work. All of the NIDs after the first comma would not be added.

It seems this is the root cause of the latest issue reported by Darby in LU-8311. The ptr has a value of 192.52.98.30@tcp,10.148.0.30@o2ib:192.52.98.31@tcp,10.148.0.31@o2ib, but from the debug log in debug.log.ib_and_eth, I can only see the first NID 192.52.98.30@tcp was added.

[Darby Vicker]

This evening I compiled the 2.9.0 release with patch 7905 reverted.  I can confirm that this did allow me to failover our OST's properly.  Once the OST were mounted with the NIDS shown in the comment above we see both TCP NIDS in /proc/fs/lustre/mgc/MGC192.52.98.30@tcp/import and the MGC connects with the secondary MDS/MGS when we failover.  

[Jian Yu]

Thank you very much Darby for the confirmation.

[Darby Vicker]

I'm sorry - it turns out I was wrong when I said reverting this patch fixed our situation.  I think what happened is that I forgot to stop lnet before I uninstalled stock 2.9.0.  I then installed and tested the patched version of 2.9.0 - but the lnet kernel modules from stock 2.9.0 stayed loaded.  So I was using some weird combination of a patched and stock version of 2.9.0.  I've repeated the tests using a version of 2.9.0 with patch 7905 reverted and the situation is actually worse - with both single rail (tcp only) or dual rail (tcp and ib) I only see one entry for failover_nids in /proc/fs/lustre/mgc/MGC192.52.98.30@tcp/import.  I can repeat the tests and dump debug logs if that would help.  

[Jian Yu]

Hi Darby,
I just updated patch https://review.whamcloud.com/21308 on master branch to fix the issue in my previous comment. The patch can be applied to Lustre 2.9.0 release directly. Could you please try it? Thank you.

[Darby Vicker]

I just tested 2.9.0 with this patch and it does indeed fix our issues.  I brought up our filesystem while configured on both TCP and IB, mounted both TCP and IB clients and failed over the MDS/MGS to the secondary.  The OST's and the clients all pick up the secondary MGS now.  Info from one of our OSS's is below - this is after the failover.  Thank you very much!  

 

[root@hpfs-fsl-oss01 ~]# cat /proc/fs/lustre/mgc/MGC192.52.98.30@tcp/import 
import:
    name: MGC192.52.98.30@tcp
    target: MGS
    state: FULL
    connect_flags: [ version, adaptive_timeouts, mds_mds_connection, full20, imp_recov, bulk_mbits ]
    connect_data:
       flags: 0x2000011005000020
       instance: 0
       target_version: 2.9.0.0
    import_flags: [ pingable, connect_tried ]
    connection:
       failover_nids: [ 192.52.98.31@tcp, 192.52.98.30@tcp ]
       current_connection: 192.52.98.31@tcp
       connection_attempts: 3
       generation: 2
       in-progress_invalidations: 0
[root@hpfs-fsl-oss01 ~]# zfs get all | grep mgs
oss01-0/ost-fsl             lustre:mgsnode        192.52.98.30@tcp,10.148.0.30@o2ib:192.52.98.31@tcp,10.148.0.31@o2ib  local
[root@hpfs-fsl-oss01 ~]# 

[Jian Yu]

Thank you very much, Darby. I'll push the patch to be ready to land.

[Gerrit Updater]

Oleg Drokin ([e-mail]) merged in patch https://review.whamcloud.com/21308/
Subject: LU-8397 mgc: add comma-separated nids for primary MGS
Project: fs/lustre-release
Branch: master
Current Patch Set:
Commit: 672e182049e1a636d8591748764950f99c4b71d9

[Jian Yu]

Patch landed to master branch for Lustre 2.10.0.